CITJobs In Plumbing
Comparison

Plumber vs. HVAC Technician: Choosing Your Mechanical Trade

They share the same contractors, the same vans and often the same customers, but plumbing and HVAC reward different kinds of brains. Here is how to tell which one is yours.

Jobs In Plumbing Editorial7 min read

Key takeaways

  • Plumbers earned a median $63,800 in May 2025 versus $61,010 for HVAC technicians, per BLS, a gap of under $3,000.
  • HVAC is projected to grow faster (11% vs. 7% for 2025 to 2035), but both trades add about 40,000 openings a year.
  • Plumbing is usually learned through a 4- or 5-year paid apprenticeship; many HVAC techs start with a 6-month to 2-year school program.
  • HVAC techs need EPA Section 608 certification to handle refrigerant, and it never expires; plumbers deal with state licensing tied to a plumbing code.
  • Choose plumbing if you like water, drains, codes and fixed systems; choose HVAC if you like electrical troubleshooting and seasonal rush work.

The plumber vs HVAC technician choice is one of the most common forks for people heading into the mechanical trades, and for good reason. Both trades are mostly employed by the same kind of company. According to the Bureau of Labor Statistics, 65% of plumbers, pipefitters and steamfitters work for plumbing, heating and air-conditioning contractors. The HVAC page puts that share at 68% for HVAC technicians.

So you might work for the same shop either way. The difference is what you do once you get to the house or the jobsite, how you get trained and what your busy seasons look like. Here is a straight comparison using BLS and EPA data, then a checklist to help you decide.

The Work: Water and Waste vs. Air and Refrigerant

Plumbers install and repair water supply, drain-waste-vent piping, fixtures and water heaters, and in many states they run gas lines. The core skills are pipe joining, grade and venting, reading a plumbing code and diagnosing clogs, leaks and pressure problems. If you like seeing a whole system laid out in your head from the street to the top-floor fixture, plumbing rewards that.

HVAC technicians install and service furnaces, heat pumps, air conditioners and refrigeration equipment. A big share of the job is electrical: control boards, thermostats, motors, capacitors and wiring diagrams. Then there is the refrigeration cycle, gauges, pressures and charging. If you like chasing a fault through a circuit, HVAC rewards that.

Both trades involve tight spaces. BLS says HVAC techs often work in cramped spaces and extreme temperatures, which means attics in summer and crawlspaces in winter. Plumbers spend more time on their knees under sinks and in crawlspaces, with sewage in the mix. We go through that side in the physical reality of plumbing.

Plumber vs HVAC Technician Pay and Job Outlook

Here are the federal numbers side by side. Both come from the BLS Occupational Outlook Handbook, which now reports May 2025 wages and 2025 to 2035 projections.

MeasurePlumbers, pipefitters and steamfittersHVAC mechanics and installers
Median annual wage$63,800 ($30.67/hr)$61,010 ($29.33/hr)
Lowest 10%Under $44,150Under $40,050
Highest 10%Over $108,420Over $95,210
Jobs (2025)510,600440,900
Projected growth 2025 to 20357%11%
Openings per yearAbout 42,000About 40,600
Median at PHC contractors$63,010$60,030

Three things stand out:

  • The median gap is small. Less than $3,000 separates the two. Where you live and who you work for will move your pay more than this choice.
  • The top end is wider in plumbing. The top 10% of the plumbing group earns over $108,420, compared with over $95,210 in HVAC. Part of that is because the BLS plumbing group includes pipefitters and steamfitters, who often work on large industrial and commercial jobs.
  • HVAC is growing faster in percentage terms. Still, both trades have about the same number of openings each year, and plumbing starts from a larger base.

If you want to see how geography changes the picture, check the highest-paying states for plumbers.

Training Routes: Apprenticeship vs. School

This is where the two trades really differ.

Plumbing is mostly learned through a paid apprenticeship. BLS describes 4 or 5 years with about 2,000 hours of on-the-job training a year, plus technical instruction in safety, codes and blueprint reading. The typical entry requirement is a high school diploma. You earn from day one, but you are committed for several years before you are fully qualified.

HVAC has more on-ramps. BLS lists the typical entry-level education as a postsecondary nondegree award. Programs at technical schools and community colleges generally last 6 months to 2 years and lead to a certificate or associate degree. Apprenticeships exist too and BLS says they usually last several years. After hiring, there is still a long stretch of on-the-job learning.

The tradeoff is simple. HVAC school gets you working sooner but usually costs tuition. A plumbing apprenticeship pays you to learn but takes longer to finish. Our trade school vs. apprenticeship guide walks through the plumbing-side version of that math.

Licensing and Certification

Plumbers: state licenses tied to a code

BLS notes that most states and some localities require plumbers to be licensed, usually after 2 to 5 years of experience and an exam on the local plumbing code. That license is the backbone of a plumbing career. It moves you from apprentice to journeyman to master and eventually lets you pull permits or run a shop. See the full plumber ladder for how the steps work.

HVAC: EPA 608 first, then state rules

The federal requirement in HVAC is EPA Section 608 certification. BLS says nearly all HVAC technicians need it to handle refrigerant. According to the EPA, there are four types:

  • Type I: small appliances
  • Type II: high- and very high-pressure equipment
  • Type III: low-pressure equipment
  • Universal: all of the above

You pass an EPA-approved test given by an approved certifying organization, and the credential does not expire. Apprentices may work without it only under close, continual supervision by a certified tech. On top of 608, BLS says some states and localities license HVAC workers, and manufacturer certifications are common.

The key difference: HVAC's main federal credential can be earned early and quickly. A plumbing license takes years of logged hours, but it carries more weight once you have it, because in most places you legally cannot do the work without it.

Seasons, Hours and Injury Risk

HVAC work is seasonal. BLS says overtime is common during peak heating and cooling seasons, and on-call duty is part of the job. The first heat wave and the first cold snap are crunch time.

Plumbing demand is steadier. Pipes leak and drains clog in every month. Service plumbers still work nights and weekends on emergency calls, according to BLS, but there is less of a boom-and-bust cycle across the year. We dig into that in why plumbing holds up in downturns.

Injury exposure: BLS says HVAC technicians have one of the highest rates of injuries and illnesses of all occupations, with burns from electrical parts and chemicals and strains from heavy equipment. For plumbers, BLS lists cuts, burns from hot pipes and soldering, and falls from ladders. Neither trade is gentle on the body.

Can You Switch or Do Both?

Many shops do both plumbing and HVAC, which makes cross-training possible. If you are a plumber, getting EPA 608 certified can make you more useful on hydronic heating, water heater and boiler calls. Just remember that the formal licenses are separate. A plumbing license does not let you do HVAC work where that is licensed, and the reverse is also true. If you want to move into HVAC later, your pipe skills and code habits carry over well, but expect to learn the electrical and refrigeration side mostly from scratch.

Running your own shop later

If owning a business is the long-term goal, both trades get you there, and neither has a big edge on paper. BLS counts 8% of plumbers, pipefitters and steamfitters as self-employed, compared with 6% of HVAC technicians. In plumbing, the route usually runs through a master license, because many jurisdictions tie permits to a licensed master. In HVAC, the credentials depend more on your state and the type of equipment you work on. Whichever trade you pick, the people who go out on their own tend to be the ones who learned estimating, customer communication and code on the company's dime first.

Decision Checklist: Plumbing or HVAC?

Check the statements that sound like you. Whichever column gets more checks is your likely fit.

Plumbing fits if you...HVAC fits if you...
Want to get paid while you learn, even if it takes 4 to 5 yearsWant to start working after a 6-month to 2-year program
Like layout, grade and building a system from the ground upLike electrical troubleshooting and diagnostic meters
Are comfortable with sewage and dirty jobsAre comfortable in hot attics and on rooftops
Want steady demand through the yearDon't mind seasonal overtime rushes
Want a license that is legally required to do the work in most statesWant a quick federal credential (EPA 608) to start
Want the higher top-end earnings in the BLS dataWant the faster projected growth rate

Bottom Line

Pay is close enough that it should not decide this for you. Choose plumbing if you want a paid apprenticeship, steady year-round work and a license that carries real legal weight, plus a bit more upside at the top. Choose HVAC if you are drawn to electrical diagnostics, want a faster school-based start and can handle seasonal swings. If you are truly torn, apply to a shop that does both and watch which calls you want to be on.

Frequently asked questions

Who makes more money, a plumber or an HVAC technician?

According to BLS, plumbers, pipefitters and steamfitters earned a median $63,800 in May 2025, compared with $61,010 for HVAC mechanics and installers. The top 10% of the plumbing group earned over $108,420 versus over $95,210 in HVAC. Location and employer usually matter more than the trade choice.

Is HVAC or plumbing easier to get into?

HVAC usually has a quicker start. BLS says HVAC programs at technical schools and community colleges last 6 months to 2 years. Plumbing is usually learned through a 4- or 5-year paid apprenticeship. HVAC school often costs tuition, while plumbing apprentices are paid from the start.

Do plumbers need EPA 608 certification?

Only if they work on equipment that holds refrigerant. EPA requires Section 608 certification for anyone who services or disposes of equipment that could release refrigerant. Plumbers who work on heat pump water heaters or in combined plumbing and HVAC shops may find it useful. The certification does not expire.

Which trade has better job growth, plumbing or HVAC?

BLS projects 11% growth for HVAC technicians and 7% for plumbers, pipefitters and steamfitters from 2025 to 2035. Both are faster than average. In raw numbers, the openings are similar: about 40,600 a year for HVAC and about 42,000 for the plumbing group.

Looking for plumbing work?

Tell us your trade, location and experience. The Careers In Trades network routes you to employers who are actually hiring. Free for workers.

Sources

  1. U.S. Bureau of Labor Statistics — Plumbers, Pipefitters, and Steamfitters (Occupational Outlook Handbook)
  2. U.S. Bureau of Labor Statistics — Heating, Air Conditioning, and Refrigeration Mechanics and Installers (Occupational Outlook Handbook)
  3. U.S. EPA — Section 608 Technician Certification Requirements

Pay, licensing and program details change and vary by state, employer and local agreement. Verify with the linked sources and your state licensing board before making decisions.